Showing results for World calibration and fixturing

Code Reader: Reading barcodes on distorted images
Discusses how to read a code on distorted images and curved surfaces.
This video was made for MIL 10 PP2 and beyond and Design Assistant 4.0 SP2 and beyond.
Discusses how to read a code on distorted images and curved surfaces.
This video was made for MIL 10 PP2 and beyond and Design Assistant 4.0 SP2 and beyond.
Drawing graphics in calibrated images
Explores how to draw graphics in different units, how to convert graphics in distorted images, and how to specify where graphics will be rendered in an image.
This video was made for MIL 10 PP3 and beyond.
Explores how to draw graphics in different units, how to convert graphics in distorted images, and how to specify where graphics will be rendered in an image.
This video was made for MIL 10 PP3 and beyond.
Example Launcher: Tsai-based calibration
Explores the portion of the Mcal example that performs 3D calibration in Tsai-based mode.
This video was made for MIL 10 PP2 and beyond.
Explores the portion of the Mcal example that performs 3D calibration in Tsai-based mode.
This video was made for MIL 10 PP2 and beyond.
Example Launcher: 3D robotics calibration
Explores the CameraOnRobotArmCalibration example in MIL Example Launcher.
This video was made for MIL 10 PP2 and beyond.
Explores the CameraOnRobotArmCalibration example in MIL Example Launcher.
This video was made for MIL 10 PP2 and beyond.
Example Launcher: Calibration
Explores the MCal example, found in MIL Example Launcher. This example illustrates how to calibrate your camera, including calibrating using a fiducial.
This video was made for MIL 10 PP2 and beyond.
Explores the MCal example, found in MIL Example Launcher. This example illustrates how to calibrate your camera, including calibrating using a fiducial.
This video was made for MIL 10 PP2 and beyond.
3D calibration: Overview
Explores how to set up and use the 3D coordinate systems, such as the camera coordinate system and the robot base coordinate system.
This video was made for MIL 10 PP2 and beyond.
Explores how to set up and use the 3D coordinate systems, such as the camera coordinate system and the robot base coordinate system.
This video was made for MIL 10 PP2 and beyond.
Registration: Overview
Explores how the Registration module works to stitch together several images. Includes a discussion of how the tool could be used for several purposes, such as creating a single large image from several smaller ones, producing a single image with greater resolution from several images with lower resolution, and extending the depth of field of an image from several images with different focal lengths.
This video was made for MIL 10 PP2 and beyond.
Explores how the Registration module works to stitch together several images. Includes a discussion of how the tool could be used for several purposes, such as creating a single large image from several smaller ones, producing a single image with greater resolution from several images with lower resolution, and extending the depth of field of an image from several images with different focal lengths.
This video was made for MIL 10 PP2 and beyond.
Calibration: Overview
Explains how to calibrate a camera to take accurate measurements in real-world units, even in the presence of lens or perspective distortion. Includes an introduction of certain coordinate systems used in MIL.
This video was made for MIL 10 PP2 and beyond.
Explains how to calibrate a camera to take accurate measurements in real-world units, even in the presence of lens or perspective distortion. Includes an introduction of certain coordinate systems used in MIL.
This video was made for MIL 10 PP2 and beyond.
Fixturing: Overview
Explores how to move the relative coordinate system according to some reference point.
This video was made for MIL 10 PP2 and beyond.
Explores how to move the relative coordinate system according to some reference point.
This video was made for MIL 10 PP2 and beyond.
How to: Do 3D mapping
Explains the basics of using laser line profiling (sheet-of-light profiling) to create 3D models of objects.
This video was made for MIL 10 PP2 and beyond.
Explains the basics of using laser line profiling (sheet-of-light profiling) to create 3D models of objects.
This video was made for MIL 10 PP2 and beyond.