Matrox Maevex 6020 Remote Recorder (Panopto)

Back to Product list

The Maevex 6020 Remote Recorder firmware package below consists of the Maevex 6020 Configuration and Firmware Utility. This utility will allow easy Maevex 6020 connection to your Panopto account. Once the connection to the Panopto cloud has been made, the 6020 Remote Recorder will be available under your Panopto account’s System and Remote Recorders tabs by name and serial number. From there you will be able to access the 6020 Remote Recorder’s Preview, Configuration, Schedule, and Access pages and manage the Maevex 6020 from there.

The Maevex 6020 Configuration and Firmware Utility, will also provide for Proxy server configuration and NTP server connectivity when necessary and will allow for export of device logs, formatting of solid state drive memory, and setting of static or dynamic IP addressing.

Finally, the Utility will also enable the execution of firmware updates when deemed necessary by local administrators.

Note that a DHCP server is required for initial connection since no IP address is assigned to new Maevex 6020 Remote Recorders.

Date Released
Firmware package & update utilities
Release Notes

6020 Configuration and Firmware Utility version

For the Quick Start Guide, click here.

Supported operating systems: Windows 10, Windows 7, Windows Server 2008 R2 and Windows Server 2016.

What to expect from your hardware and software - please see release notes.

Panopto cloud account is required for the Maevex 6020 Remote Recorder to be operational. Make sure you have an active Panopto cloud account. If you do not have a Panopto cloud account contact your Panopto sales representative or go to www.Panopto.com.

For the complete User Guide, click here.