CompatibilityCompatible with any Veos Master or Repeater unit.
Maximum resolution 1Up to 1080p or 1920x1200

(click here for complete list)

Cable specification

* An RS-232 DB-9 serial cable that connects from your Display unit to one of your monitors is only required if unidirectional RS-232 is desired. If you desire to have both monitors driven by unidirectional RS-232, your monitor would need to have a daisy chain serial feature.

Minimum system requirements Refer to the minimum system requirements of the Master unit.
Installation Veos components are all external to your PC. Setup is as easy as 1,2,3. Once the hardware has been connected properly, an LED indicator light will validate the install. After the software has been installed, you are ready to set up your content. Only one Master unit is required in any Veos install - a minimum of at least one Display Unit is required to complete the extension.
Distance generated Greater than 100 meters
Part #: VS-DSPL-0F

6.63" (Width) x 5.19" (Depth) x 1.25" (Height)

16.84 cm (Width) x 13.18 cm (Depth) x 3.18 cm (Height)

  • One coax input (BNC)
  • Two DVI-I outputs*
  • One serial output (DB-9)
  • One coax output (BNC)
  • One USB input

* Two DVI-I to VGA 15-pin adaptors provided

Other feature LED power/signal indicator
MTBF Over ten years including power supply - contact Matrox for more details.
Power supply 5 volts, 3 amps
Certifications EMC
  • Class A: FCC, CE, VCCI, ACMA
  • C-UL-us
  • GS-TUV
  • S-Mark Argentina
  • PSE Japan
  • CCC China
  • K-Mark Korea
  • N-Mark Australia
Warranty3 year limited warranty
Hardware included
  • Veos Display unit
  • Two DVI - VGA 15-pin adaptors
  • External 5VDC, 3A power supply + Two Power cords (US & EU) / USB cable
  • Two power plug adaptors (UK and AUS/NZ)
  • Quick Install guide

1 System dependent. Maximum resolutions supported may vary.