Matrox Xenia Series

End of life (EOL) effective early 2015
Matrox Xenia Series is an EOL product and is no longer being manufactured or sold by Matrox. Consult your local resellers and distributors for available inventory. Customers looking for alternative solutions should contact Matrox.

Matrox Xenia Series

Enjoy the view.

Matrox Xenia™ Series display controller boards are designed for use in computed radiography (CR), digital radiography (DR), and PACS workstations and support a wide range of display formats, resolutions and configurations. The native PCIe x16 single slot boards feature up to 1 GB of on-board RAM for fast image loading capacity and manipulation and each board can drive up to three high resolution digital displays, minimizing time required to install, configure and deploy imaging workstations. Each digital display output from Xenia and Xenia Pro supports the features listed below, including 8-, 10- and 13-bit independent GAMMA LUTs for precise DICOM calibration of grayscale and color displays, providing more accurate image display for viewing and diagnoses.

Xenia Xenia Pro
High Speed Frame Buffer 512 MB 1024 MB
Resolution Navigation Console Up to 3.3MP
(landscape or portrait)
Up to 4MP
(landscape or portrait)
Resolution Imaging Display 1 Up to 3.3MP
(landscape or portrait)
Up to 8MP
(landscape or portrait)
Resolution Imaging Display 2 Up to 3.3MP
(landscape or portrait)
Up to 8MP
(landscape or portrait)
(per output)
8/10/13-bits 8/10/13-bits
Hardware LUTs
(per output)
8/10-bits 8/10-bits
Hardware Window IDs (HWIDs)2 5 per display output connector 9 per display output connector
  • PCIe x16 single-slot board with triple high resolution digital-display output
  • DICOM compliant 8/10/13-bit LUT GAMMA ramp correction supported on all outputs in independent and/or stretched (NT-style) desktop modes for accurate display calibration
  • Digital Luminance Correction™ (DLC™)1–enables calibration packages to uniformly calibrate display luminance to well-within industry standards.
  • Dynamic Field-of-View Correction (DFC)1–with appropriate 3rd party applications, DFC reduces color and/or grayscale inaccuracies caused by different viewing angles of LCDs.
  • Image Color Profiling (ICP)1–allows 3rd party developers to use hardware-enabled ICP with up to 13-bits for accurate color rendering of subtle anatomical image structures.
  • Programmable Gamma LUTs supporting 8, 10 and 13-bit wide formats–for the highest calibration, meeting or exceeding DICOM industry standards across the entire display.
  • Hardware Window IDs and LUTs–with multiple screen regions available, application can exploit hardware-accelerated window and level functionality on a specified region.
  • Hardware pivot and cursor support as well as optimized bus performance and increased memory provide fast and smooth user experience for window & level and cineloops.
  • Enhanced features available through Matrox imaging Library (MIL) to enable hardware-accelerated operations such as image cached window/levelling, zoom, and the ability to view 1024 simultaneous shades of gray from 16-bit source images.

Support can differ amongst OEM versions
1 Not all displays may benefit from DLC, DFC and ICP. Maintaining government and industry regulation compliance is the user's responsibility.
2 Some conditions may apply.