cs_top.jpg

Matrox Maevex

Back to Product list

To take advantage of the latest PowerStream/PowerStream Plus software features, you need the latest Maevex firmware.  Both the PowerStream/PowerStream Plus software and Maevex firmware need to be updated. These are two separate required installations.
Please note: For new deployments, IP addresses must be assigned to Maevex units. The Maevex PowerStream/PowerStream Plus application must be installed on a system within the Maevex subnet and the network must initially include a DHCP service in order to properly assign IP addresses to the units and then perform a Maevex firmware update.

Maevex PowerStream Plus Software and Firmware for 6100 and 5100 Series


Your Matrox Maevex product may ship with an older firmware version. Before using your Maevex product, you must update the firmware version installed on your devices to use the version of your deployed release. All Maevex devices on a Maevex network must use the same version of the firmware package. Your firmware package version must also match the package version of your PowerStream Plus software. Note that the firmware revision that is installed onto your Maevex 5100 devices will differ from the firmware revision installed onto your Maevex 6100 devices and this is supported as long as they are from the same firmware installation package. Contact Matrox Technical Support for more details.

Date Released
PowerStream Plus Software
Firmware package & update utility
Release Notes
2016-12-22

PowerStream Plus Setup 2.00.00.299Do not forget to also download and install the new firmware: Firmware Package Version 2.00.00.299



Windows 10 (64-bit or 32-bit)
Windows 8.1 (64-bit or 32-bit)
Windows 7 (64-bit or 32-bit)
Windows Server 2012R2 (64-bit)
Windows Server 2012 (64-bit)
Windows Server 2008R2 (64-bit)

Firmware Package Version 2.00.00.299Do not forget to also download and install the new software: PowerStream Plus Setup 2.00.00.299



Please follow the firmware update instructions.

Supported operating systems: Windows 10, Windows 8.1, Windows 7, Windows Server 2012 R2, Windows Server 2012 and Windows Server 2008 R2.

What to expect from your hardware and software - please see release notes.

Matrox does not support the mix and match of Maevex units of the same series with different firmware versions. All Maevex devices on a Maevex network must use the same version of the firmware package. Your firmware package version must also match the package version of your PowerStream Plus software. Contact Matrox Technical Support for more details.


Maevex PowerStream Software and Firmware for 5100 Series


All Maevex units on a given Maevex network require the same firmware & software revisions. Matrox does not support the mix and match of Maevex units with different FW. Please ensure that all units on a given Maevex network have the same Firmware installed. Contact Matrox Technical Support for more details.

Upgrading to a more recent PowerStream version

If you currently have installed a version of Matrox PowerStream software and firmware, and you want to upgrade, we recommend not uninstalling your current installed version before installing the new version. Otherwise, any Matrox Maevex units that were manually added to the environment will no longer appear. If you choose to uninstall your current installed version of the Matrox PowerStream software and firmware before installing the new version, contact Matrox Technical Support.


Date Released
PowerStream Software
Firmware & update utility
Release Notes
2016-11-22

PowerStream Setup 1.05.03.007Do not forget to also download and install the new firmware: Firmware Version 1.05.03.007



Windows 10 (64-bit or 32-bit)
Windows 8.1 (64-bit or 32-bit)
Windows 8 (64-bit or 32-bit)
Windows 7 (64-bit or 32-bit)
Windows Server 2012R2 (64-bit)
Windows Server 2012 (64-bit)
Windows Server 2008R2 (64-bit)

Firmware Version 1.05.03.007Do not forget to also download and install the new software: PowerStream Setup 1.05.03.007



Please follow the firmware update instructions.

Supported operating systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Server 2012 R2, Windows Server 2012 and Windows Server 2008 R2.

What to expect from your hardware and software - please see release notes.

Matrox does not support the mix and match of Maevex units with different FW. All units on a given Maevex network must have the same FW installed. Contact Matrox Technical Support for more details.

2016-07-20

PowerStream Setup 1.05.02.005Do not forget to also download and install the new firmware: Firmware Version 1.05.02.005



Windows 10 (64-bit or 32-bit)
Windows 8.1 (64-bit or 32-bit)
Windows 8 (64-bit or 32-bit)
Windows 7 (64-bit or 32-bit)
Windows Server 2012R2 (64-bit)
Windows Server 2012 (64-bit)
Windows Server 2008R2 (64-bit)

Firmware Version 1.05.02.005Do not forget to also download and install the new software: PowerStream Setup 1.05.02.005



Please follow the firmware update instructions.

Supported operating systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Server 2012 R2, Windows Server 2012 and Windows Server 2008 R2.

What to expect from your hardware and software - please see release notes.

This release added additional resolutions. Please see release notes above for more details.

Matrox does not support the mix and match of Maevex units with different FW. All units on a given Maevex network must have the same FW installed. Contact Matrox Technical Support for more details.
2016-02-25

PowerStream Setup 1.05.01.007Do not forget to also download and install the new firmware: Firmware Version 1.05.01.007



Windows 10 (64-bit or 32-bit)
Windows 8.1 (64-bit or 32-bit)
Windows 8 (64-bit or 32-bit)
Windows 7 (64-bit or 32-bit)
Windows Server 2012R2 (64-bit)
Windows Server 2012 (64-bit)
Windows Server 2008R2 (64-bit)

Firmware Version 1.05.01.007Do not forget to also download and install the new software: PowerStream Setup 1.05.01.007



Please follow the firmware update instructions.

Supported operating systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Server 2012 R2, Windows Server 2012 and Windows Server 2008 R2.

What to expect from your hardware and software - please see release notes.

This release addresses an issue with the backward compatibility of the PowerStream API. For all other intents and purposes it is equivalent to the 1.05.00.012 release.

Matrox does not support the mix and match of Maevex units with different FW. All units on a given Maevex network must have the same FW installed. Contact Matrox Technical Support for more details.
2016-02-02

PowerStream Setup 1.05.00.012Do not forget to also download and install the new firmware: Firmware Version 1.05.00.012



Windows 10 (64-bit or 32-bit)
Windows 8.1 (64-bit or 32-bit)
Windows 8 (64-bit or 32-bit)
Windows 7 (64-bit or 32-bit)
Windows Server 2012R2 (64-bit)
Windows Server 2012 (64-bit)
Windows Server 2008R2 (64-bit)

Firmware Version 1.05.00.012Do not forget to also download and install the new software: PowerStream Setup 1.05.00.012



Please follow the firmware update instructions.

Supported operating systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Server 2012 R2, Windows Server 2012 and Windows Server 2008 R2.

What to expect from your hardware and software - please see release notes.

Matrox does not support the mix and match of Maevex units with different FW. All units on a given Maevex network must have the same FW installed. Contact Matrox Technical Support for more details.
2015-07-17

PowerStream Setup 1.04.00.080Do not forget to also download and install the new firmware: Firmware Version 1.04.00.080



Windows 10 (64-bit or 32-bit)
Windows 8.1 (64-bit or 32-bit)
Windows 8 (64-bit or 32-bit)
Windows 7 (64-bit or 32-bit)
Windows Server 2012R2 (64-bit)
Windows Server 2012 (64-bit)
Windows Server 2008R2 (64-bit)

Firmware Version 1.04.00.080Do not forget to also download and install the new software: PowerStream Setup 1.04.00.080



Please follow the firmware update instructions.

Supported operating systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Server 2012 R2, Windows Server 2012 and Windows Server 2008 R2.

What to expect from your hardware and software - please see release notes.

Matrox does not support the mix and match of Maevex units with different FW. All units on a given Maevex network must have the same FW installed. Contact Matrox Technical Support for more details.

The Matrox decoder now supports MPEG4-LATM and MPEG4-GENERIC audio streaming and the Matrox encoder only supports MPEG4-GENERIC audio streaming.

2015-04-24

PowerStream Setup 1.03.05.007Do not forget to also download and install the new firmware: Firmware Version 1.03.05.007



Windows 8.1 (64-bit or 32-bit)
Windows 8 (64-bit or 32-bit)
Windows 7 (64-bit or 32-bit)
Windows Server 2012R2 (64-bit)
Windows Server 2012 (64-bit)
Windows Server 2008R2 (64-bit)

Firmware Version 1.03.05.007Do not forget to also download and install the new software: PowerStream Setup 1.03.05.007



Please follow the firmware update instructions.

Supported operating systems: Windows 8.1, Windows 8, Windows 7, Windows Server 2012 R2, Windows Server 2012 and Windows Server 2008 R2.

What to expect from your hardware and software - please see release notes.

Matrox does not support the mix and match of Maevex units with different FW. All units on a given Maevex network must have the same FW installed. Contact Matrox Technical Support for more details.

The Matrox decoder now supports MPEG4-LATM and MPEG4-GENERIC audio streaming and the Matrox encoder only supports MPEG4-GENERIC audio streaming.



For older PowerStream and Firmware packages, please click here.

To view the Open Source packages used by Matrox and License notification, click here.