Showing results for 3D

Using Metrology: Edgel management of external edgel features for 3D profile/cross section analysis
Explores how you can use Metrology to analyze external edgel features such as 3D profiles and cross sections.
This video was made for MIL 10 PP3 and beyond.
Explores how you can use Metrology to analyze external edgel features such as 3D profiles and cross sections.
This video was made for MIL 10 PP3 and beyond.
Setting up the Matrox AltiZ for scanning in Matrox Capture Works
Explains the steps for using the Matrox® AltiZ to capture single profile scans as well as multi-profile surface scans with and without an encoder.
Explains the steps for using the Matrox® AltiZ to capture single profile scans as well as multi-profile surface scans with and without an encoder.
Acquiring 3D data with the Matrox AltiZ
Explores how the Matrox® AltiZ acquires 3D data and stores it in containers.
Explores how the Matrox® AltiZ acquires 3D data and stores it in containers.
Adjusting the AltiZ to improve 3D reproduction quality
Decribes how the Matrox AltiZ acquires 3D data and explores strategies for improving 3D reproduction quality when scanning objects that are very dark, very textured, or highly reflective.
Decribes how the Matrox AltiZ acquires 3D data and explores strategies for improving 3D reproduction quality when scanning objects that are very dark, very textured, or highly reflective.
Mounting and Powering your Matrox AltiZ
Describes best practices for mounting and powering the Matrox AltiZ
Describes best practices for mounting and powering the Matrox AltiZ
Configuring your AltiZ's encoder and trigger settings
Explains how to resolve some common setup errors when using the AltiZ with an encoder.
This video was made for MIL X and beyond and Design Assistant X and beyond.
Explains how to resolve some common setup errors when using the AltiZ with an encoder.
This video was made for MIL X and beyond and Design Assistant X and beyond.
Example Launcher: Tsai-based calibration
Explores the portion of the Mcal example that performs 3D calibration in Tsai-based mode.
This video was made for MIL 10 PP2 and beyond.
Explores the portion of the Mcal example that performs 3D calibration in Tsai-based mode.
This video was made for MIL 10 PP2 and beyond.
3D calibration: Overview
Explores how to set up and use the 3D coordinate systems, such as the camera coordinate system and the robot base coordinate system.
This video was made for MIL 10 PP2 and beyond.
Explores how to set up and use the 3D coordinate systems, such as the camera coordinate system and the robot base coordinate system.
This video was made for MIL 10 PP2 and beyond.
How to: Do 3D mapping
Explains the basics of using laser line profiling (sheet-of-light profiling) to create 3D models of objects.
This video was made for MIL 10 PP2 and beyond.
Explains the basics of using laser line profiling (sheet-of-light profiling) to create 3D models of objects.
This video was made for MIL 10 PP2 and beyond.