| Windows 2000 test results |
Tested configuration
| CPU |
1.1-GHz Athlon |
| BIOS |
Award version 1004 date: 03/08/01 |
| Memory |
256-MB SDRAM |
| Storage |
Used FastTrak controller |
| Software |
Matrox Video Tools 3.0 with Adobe Premiere 6.0 |
Installed expansion cards
| PCI 5 |
— |
| PCI 4 |
— |
| PCI 3 |
— |
| PCI 2 |
RT2500 codec card |
| PCI 1 |
Netgear network card
Model: FA-310TX
Version: 4.54.16.0
Date: 10/19/99 |
|
Tested AGP display cards
Additional required software
We installed patches and drivers in the following order: |
| 1 |
Microsoft Service Pack 1 for Windows 2000. |
| 2 |
Microsoft Hot Fix Patch, Q260233w2ksp2x86en.exe. |
| 3 |
VIA 4-in-1 driver, version 4.29v.
|
Comments
|
| 1 |
If any problems occur during print to tape, the Front Side Bus should be set to 133 MHz in the BIOS.
|
|
*16 and 32 refer to color depth in bits
|
| Windows Me test results |
Tested configuration
| CPU |
1.1-GHz Athlon |
| BIOS |
Award version 1004 date: 03/08/01 |
| Memory |
256-MB SDRAM |
| Storage |
Used FastTrak controller |
| Software |
Matrox Video Tools 3.0 with Adobe Premiere 6.0 |
Installed expansion cards
| PCI 5 |
— |
| PCI 4 |
— |
| PCI 3 |
— |
| PCI 2 |
RT2500 codec card |
| PCI 1 |
Netgear network card
Model: FA-310TX
Version: 4.54.16.0
Date: 10/19/99 |
| ISA 1 |
— |
|
Tested AGP display cards
Additional required software
We installed patches and drivers in the following order: |
| 1 |
VIA 4-in-1 driver, version 4.29v.
|
Comments
|
| • |
If any problems occur during print to tape, the Front Side Bus should be set to 133 MHz in the BIOS.
|
| • |
To use a non-Matrox display card on a Windows Me system, you must check your Matrox RT2500's BIOS version, and if needed, download and run the Matrox Flex 3D BIOS updater as explained in the RT2500 utilities and fixes section in the Matrox RT2500 software area. |
|
*16 and 32 refer to color depth in bits
|
|