Sony DSR-1500

Video standard	Manual capture	Batch capture	Print to tape	Device control	Frame accurate
NTSC	Yes	Yes	Yes	Yes	Yes

Comments

• This device was tested with Matrox Video Tools 3.0 with Service Pack 1.

Configuration details

1. To be able to properly use device control with this device, make sure the SDTI/ILINK button under INPUT SELECT is set to ILINK.
2. Once you have connected your device to a monitor, make sure you set the remote interface to ILINK by pressing the Menu button, then choosing Setup Menu > Interface Select > Remote I/F > i_link.
3. For Print to tape to work correctly on this device, make sure the following settings are applied:
   1. Choose Setup Menu > Operational Function > auto EE select > STOP. The STOP setting should be set to EE.
   2. Choose Setup Menu > Operational Function > Tape Protection > From STOP. The From STOP setting should be set to 3min or more.