System compatibility test
Supermicro P4DC6
 |
Motherboard specifications
| Revision |
1.01 |
| CPU |
Dual Socket 603:
Xeon 1.3 GHz + |
| Chipset |
Intel 860 |
| Expansion slots |
4 32-bit PCI
2 64-bit PCI
1 AGP |
| Storage I/O |
Onboard EIDE
Dual Adaptec 29160 controller
Onboard network
Onboard sound |
| Front Side Bus |
400 MHz |
|
Important note
| Windows 2000 test results |
Tested configuration
| CPU |
Dual 1.7-GHz Xeon |
| BIOS |
Award version 1.2 date: 05/26/02 |
| Storage |
256-MB RDRAM |
| Software |
DigiUtils 7.0 and Adobe Premiere 6.0 |
| SCSI controller |
Adaptec 29160 |
| AGP |
Matrox G450 |
| PCI 6 |
|
| PCI 5 |
|
| PCI 4 |
Adaptec 29160 |
| PCI 3 |
|
| PCI 2 |
Matrox MAX |
| PCI 1 |
DigiSuite LE |
|
| AGP |
Matrox G450 |
| PCI 6 |
|
| PCI 5 |
|
| PCI 4 |
Adaptec 29160 |
| PCI 3 |
|
| PCI 2 |
Matrox MAX |
| PCI 1 |
DigiSuite DTV |
|
| AGP |
Matrox G450 |
| PCI 6 |
|
| PCI 5 |
|
| PCI 4 |
Adaptec 29160 |
| PCI 3 |
|
| PCI 2 |
Matrox MAX |
| PCI 1 |
DigiSuite LX |
|
Additional required software
We installed patches and drivers in the following order:
- Microsoft Service Pack 2 for Windows 2000.
- Intel Chipset Software Installation Utility, version 2.90.009
Comments
- The onboard SCSI is not supported with DigiSuite products. A separate SCSI controller must be inserted into a 32-bit PCI slot.
|
For more information, see http://www.supermicro.com.
The information in this document is subject to change. For the latest updates to this information, please check this site often. Matrox does not guarantee that the hardware listed as recommended will perform adequately to meet any particular customer's needs. This document shows our results at the time of testing. Changes to these systems may have occurred since completion of our tests. Contact the motherboard and computer system vendor for particular BIOS versions. Other untested computer systems may provide adequate performance; however, you may experience configuration difficulties. This document was last updated July 18th 2002
List of Validated motherboards
回到开头