The Matrox Solios XCL supports either two independent Camera Link® Base ports or a single Camera Link® Medium port. The board captures from base or medium Camera Link® area or line scan cameras at up to 66 MHz, and can also perform complete image reconstruction from multi-tap cameras.

The Matrox Solios XA has up to four completely independent inputs, each capable of high fidelity video capture at a maximum rate of 65 MHz per input. In addition to supporting simultaneous acquisition from up to four single-tap video sources, the inputs can be combined to acquire from two dual-tap video sources or one RGB video source.

Both the Solios XCL and Solios XA offer an optional, customizable processing core based on the Altera® Stratix™ FPGA family to accelerate specific routines in an application. The Altera® Stratix™ devices are available with or without memory (SDRAM and/or SRAM) to offer users maximum flexibility for their application's needs.

Established in 1976, Matrox Imaging is a leading designer of PC-based hardware and software for machine vision, image analysis, medical imaging, and video surveillance. Products include frame grabbers, vision processors, imaging platforms, smart cameras, and development software. Headquartered in Montreal, Quebec, Canada, Matrox is a privately held company with international offices in the United Kingdom, France, and Germany. For more company information, visit: www.matrox.com/imaging/about/.

Catherine Overbury

Marketing Communications Manager

Matrox Imaging

1055 St. Regis Blvd.

Dorval, Quebec, H9P 2T4

Canada

Telephone: (514) 685-2630 ext. 2459

Fax: (514) 822-6273