Analog Video Input connector
The two analog video input connectors are DVI dual channel input female connectors. They are used to receive video input signals and transmit/receive timing, synchronization, and communication signals between the camera and the frame grabber.
| Pin | Signal |
| A1 | Analog video input 1 (red) |
| A2 | Analog video input 2 (green) |
| 1 | TTL trigger input + |
| 2 | Ground |
| 3 | TTL trigger input - |
| 4 | Analog video input 4 (alpha) |
| 5 | Analog video input 3 (blue) |
Matrox cable is available to interface to this connector. A custom cable can be built using the following components:
| Part Description | Manufacturer | Part no. |
| coaxial housing | ITT Cannon | DAM7W2SMA197 |
| shielded metalized plastic backshell |
ITT Cannon | DA121073-150 |
| 75-Ohm contact | ITT Cannon | DM53742-31 |
| extended jackscrew | ITT Cannon | 250-8501-010 |