Pressemitteilungen
Das Neuste über die Spitzentechnologie PC-basierter Bildverarbeitung für industrielle, medizinische und wissenschaftliche Anwendungen.
Matrox Imaging demonstrates vision hardware and software for automated guidance, inspection, and tracing at ATX West
February 7, 2012, Montreal, Canada — Matrox Imaging will demonstrate vision hardware and software for automated guidance, inspection, and tracing at ATX West (February 14-16, 2012, Anaheim, CA). Visit booth 4271 and watch the Matrox Iris GT smart camera perform ID mark reading and print verification using Matrox Design Assistant software.
Matrox Imaging Library (MIL) classroom trainings scheduled for April 2012
January 4, 2012, Montreal, Canada — Matrox Imaging is offering classroom training the Matrox Imaging Library (MIL) processing tools and the MIL/MIL-Lite environment, April 16-20, 2012, at its Montreal, Canada headquarters.
Der Framegrabber Matrox Radient eV-CXP CoaXPress (CXP) wird auf der Vision 2011 erstmalig vorgestellt
8. November 2011, Stuttgart, Deutschland — Matrox Imaging stellt auf der Vision 2011 den Matrox Radient eV-CXP vor, einen kostengünstigen CoaXPress (CXP)-Framegrabber der Produktfamilie Matrox Radient. Durch die Verbindung des in der Praxis bewährten Designs mit dem neuen CXP-Interface ist der Matrox Radient eV-CXP eine zuverlässige und hochleistungsfähige Bilderfassungslösung.
Matrox Imaging Library (MIL) bietet verbessertes Lesen und Prüfen von Code, eine neugestaltete GPU-basierte Verarbeitung und Unterstützung des Camera Link Protokolls GenICam™
8. November 2011, Stuttgart, Deutschland — Matrox Imaging kündigt auf der Vision 2011 Erweiterungen für die Matrox Imaging Library (MIL) 9 an, einem Software-Entwicklungswerkzeug für die Bildanalyse, industrielle Bildverarbeitung, Machine Vision, medizinische Bildverarbeitung und Videoanalyse. Die Erweitungen beinhalten Verbesserungen beim Lesen und Verifizieren von Code und bei der GPU-basierten Verarbeitung sowie die Unterstützung von GenICam™.
Matrox Imaging zeigt auf der Vision 2011 Hardware und Software für die industrielle Bildverarbeitung
8. November 2011, Stuttgart, Deutschland — Matrox Imaging wird auf der Vision 2011 die neuste Hardware und Software für Anwendungen der industriellen Bildverarbeitung und Machine Vision präsentieren.
Matrox Imaging demonstrates vision hardware and software for packaging and processing at PACK EXPO 2011
September 22, 2011, Montreal, Canada — At PACK EXPO 2011 (September 26-28, 2011, Las Vegas, NV), watch Matrox Imaging vision hardware and software inspect packaging and read ID marks.
Matrox Imaging to offer smart camera workshops at PACK EXPO 2011
September 7, 2011, Montreal, Canada — Matrox Imaging is hosting an "open house" and workshops at PACK EXPO 2011 to showcase the Matrox Iris GT and Matrox Design Assistant smart camera and software package.
Wachstum mit Erfolg: Matrox feiert sein 35. Jubiläum
29. Juni 2011, Montreal, Kanada — Mit der Einführung des ersten Matrox Produktes Video-RAM (einem speziellen Videoanzeigegerät für die erste Generation von Mikrocomputern) im Jahr 1976 hoben die beiden Firmengründer Branko Matic und Lorne Trottier ein Unternehmen aus der Taufe, dass seit nunmehr 35 Jahren innovative, branchenführende Produkte entwickelt.
Matrox Imaging Library (MIL) classroom trainings scheduled in North America
June 15, 2011, Montreal, Canada — Matrox Imaging is offering classroom training on the Matrox Imaging Library (MIL) processing tools and the MIL/MIL-Lite environment, September 12-16, 2011 at its Montreal, Canada headquarters.
Stellungnahme von Matrox zum Geschäftsbetrieb nach dem Erdbeben und dem Tsunami in Japan
11. April 2011, Montreal, Kanada — Matrox hat die Lage in Japan aufmerksam verfolgt, und unsere Gedanken sind bei den Menschen, die von den tragischen Geschehnissen nach dem Erdbeben und dem Tsunami am 11. März betroffen sind.
Matrox Iris GT smart camera with Design Assistant 2.4 software brings color to machine vision
March 21, 2011, Chicago, IL — At Automate 2011, Matrox Imaging is announcing that the Matrox Iris GT color smart cameras work with Design Assistant 2.4 software to offer new possibilities for manufacturing control and inspection.
Matrox Iris GT smart camera now offers 5 megapixel sensor
March 21, 2011, Chicago, IL — At Automate 2011, Matrox Imaging is announcing that the Matrox Iris GT smart camera now offers a model with a 5 MP (megapixel) monochrome CCD sensor.
Matrox GatorEye GigE Vision® camera features laser line extraction for 3D scanning
March 21, 2011, Chicago, IL — At Automate 2011, Matrox Imaging is announcing that the Matrox GatorEye GigE Vision® industrial camera offers 3D capabilities.
Matrox Imaging demonstrates machine vision hardware and software at Automate 2011
March 21, 2011, Chicago, IL — At Automate 2011, (McCormick Place North, Booth 428), Matrox Imaging is demonstrating the latest hardware and software for machine vision systems.
Matrox Supersight e2 HPC platform now integrates ATI FirePro™ Professional Graphics
February 8, 2011, Montreal, Canada — Matrox Imaging is pleased to announce that the Matrox Supersight e2 high-performance computing (HPC) platform is now equipped with ATI FirePro™ Professional Graphics from AMD (NYSE: AMD).
