Compatibility	Compatible with any Veos Master or Display unit.
Maximum resolution ¹	Up to 1080p or 1920x1200 (click here for complete list)
Cable specification	RG6 or RG11 (BNC) coaxial such as Belden 1694A (not included) Click for a complete list of supported coaxial cables. Other coax cables may work with Veos, but distance cannot be guaranteed. Cat5 or Cat6 for power over Ethernet (not included)
Minimum system requirements	Refer to the minimum system requirements of the Master unit.
Installation	Veos components are all external to your PC. Setup is as easy as 1,2,3. Once the hardware has been connected properly, an LED indicator light will validate the install. After the software has been installed, you are ready to set up your content. Only one Master unit is required in any Veos install - a minimum of at least one Display unit is required to complete the extension.
Distance generated	Greater than 100 meters on each output
Part #	VS-RPTR-0F
Dimensions	6.63" (Width) x 5.19" (Depth) x 1.25" (Height) 16.84 cm (Width) x 13.18 cm (Depth) x 3.18 cm (Height)
Connectors	One coax input (BNC) Two coax output (BNC) One RJ45 in for power over Ethernet Two RJ45 out for extension of power over Ethernet
Other feature	LED power/signal indicator
Power supply	PoE power supply included. 56VDC, 30W for power to drive up to 10 Repeaters from a single power supply.
Certifications	Class A: FCC, CE, VCCI, ACMA
Warranty	3 year limited warranty
Hardware included	Veos Repeater unit PoE power supply + Two power cords (US & EU) Two power plug adaptors (UK & AUS/NZ) Quick Install guide

¹ System dependent. Maximum resolutions supported may vary.